Mustang Motorcycle Seats Studded Tank Bib - Honda VT750 C2 Spirit & Shadow Phantom VT750C2 - Manual

Installation Instructions for Mustang
Tank Bibs
on 2007-2010 Honda VT750 C2 Spirit
Step 1 Remove seat from motorcycle.
Step 2 Remove two screws holding dash panel to
tank.
Step 3 Lift dash panel high enough to slide tank bib
over dash panel bracket.
Step 4 Make sure that center hole in bib is centered
over the dash panel bracket.
Step 5 Lower dash panel into place on bib and
mounting bracket. When you are satisfied with the
bib’s position, install and tighten two screws to se-
cure dash panel.