Mustang Motorcycle Seats One-Piece Deluxe DayTripper Seat - Harley-Davidson Dyna Glide User Manual
Mustang Motorcycle Seats For motorcycles
Installation Instructions:
2006-2013 Dyna
One-Piece Seats
A. Baseplate Features
One-piece baseplates are constructed of marine-grade
fiberglass. Front of seat engages at nose and the rear
end is secured with a single stock fender screw.
B. Removal of Stock Seat
1. Remove rear fender screw.
2. Lift seat up and pull back to remove it from the bike.
3. If a passenger hand strap is present, it must be removed
before installing the Mustang seat.
C. Installation of Mustang Seat
1. Engage nose tab at front of seat into receiver on bike
frame.
2. Align rear tab with threaded insert in fender and secure
seat with 1/4-20 screw.
These steps are guidelines to help you install your new Mustang product. If you need
further assistance please call us at 800-243-1392, Monday through Friday 9:00 - 5:30
Eastern or send an e-mail to
or visit our website
at
www.mustangseats.com.
For care and maintenance of our seats, please go to our website under
"Support".
Ref: part #'s 75584, 75615, 75595, 75545, 75625, 75605, 75639, 75435, 75535, 75480
Enjoy the comfort of your new Mustang seat.