Mustang Motorcycle Seats Studded Fender Bib - Honda VT1100 ACE & ACE Tourer User Manual
Mustang Motorcycle Seats For motorcycles
These steps are guidelines to help you install your new Mustang product. If you need further assistance,
please call us at 800-243-1392, Monday through Friday 9:00 - 5:30 Eastern, or send an email to
[email protected], or visit our website at www.mustangseats.com.
For care and maintenance of our seats, please go to our website under "Support".
Ref part #78065, 78066
Mounting Suggestions:
Honda VT1100 ACE & ACE Tourer 1995-01
Fender Bib
Mounting of Mustang Fender Bib
1. Remove seat.
2. Align bib on fender using rear fender screw to attach bib.
3. Attach front of fender bib with supplied Velcro®.
4. Install solo.
NOTE: Mustang recommends removal of fender bib before
reinstalling rear seat. Mounting a rear seat over a fender bib
may result in damage to the bib, poor seat alignment or
other problems.
Enjoy the custom look of yourMustang Fender Bib!
Plain
Studded