Mustang Motorcycle Seats One-Piece DayTripper Seat - Yamaha V-Star 1100 Custom - Manual

Mounting Suggestions for the Yamaha V-
Star 1100 Custom 1999-20
11
One-Piece Seat
Tools Required:
• Metric Allen Wrench
• Metric Sockets
Hardware:
• Stock Yamaha Shoulder Washer
• Black Nylon Washer (Included)
Stock Seat Removal Steps
1. Remove off rear fender nut, lift rear of seat up then back
off the fender.
2. Remove the two 6 mm Allen screws holding the U-Bracket
and Solo to the fender.
3. Lift back of Solo up and off the frame.
4. Reinstall just the 6 mm Allen screws and tighten. DO NOT
INSTALL THE U-BRACKET BACK ON TO THE FENDER
WITH OUR SEAT.
5. Remove 8 mm mounting bolt with a 10 mm socket
Step 2
Step 4