Mustang Motorcycle Seats Studded Pouch Tank Bib - Kawasaki Vulcan 2000 LT - Manual

Thank you and enjoy your Mustang Tank Bib!
These steps are guidelines to help you install your new Mustang product. If you need further assistance,
please call us at 800-243-1392, Monday through Friday 9:00 - 5:30 Eastern, or send an email to
[email protected], or visit our website at www.mustangseats.com.
For care and maintenance of our seats, please go to our website under "Support".
Ref part #93213, 93214, 93185, 93334, 93335, 93186
Mounting Suggestions:
Kawasaki Vulcan 2000
Classic 2004-09 & LT 2006-09
Tank Bib
Mounting of Mustang Tank Bib
1. Remove seat.
2. Remove the one dash mounting bolt with a 4 mm
Allen wrench.
3. Open gas cap then slide dash back toward the rear
of bike.
4. Place the tank bib over the gas cap and dash
mounting square boss. (see image)
5. Slide dash forward into its front mounts then install
Allen bolt. (see image)
6. Remove rear mounting bolt at base of gas tank with
12 mm wrench.
7. Fasten the rear of bib with the tank's rear mounting
bolt. Be sure to place the tank's large flanged washer
over the bib, then install bolt. (see image)
8. Tighten with a 12 mm wrench.
Step 4
Step 5
Step 7