Mustang Motorcycle Seats Studded Pouch Tank Bib Honda VT1300 Interstate User Manual
Mustang Motorcycle Seats For motorcycles
Installation Instructions for
Mustang Tank bib on
2010-2011 Honda VT1300 Sabre,
Stateline, and Interstate
These steps are guidelines to help you install
your new Mustang product. If you need
further assistance please call us at 800-243-
1392, Monday through Friday 9:00 - 5:30
Eastern or send an e-mail to
or visit our website
at
www.mustangseats.com.
For care and maintenance of our seats, please go to our website under
"Support".
Ref. part #’s 93219, 93220, 93350, 93351
Installation of tank bib
1. Remove seat from bike.
2. Locate and loosen two screws at
front end of dash panel. Re-
move screw at base of gas tank.
3. Slide tank bib into place, on top
of wire harness, and under edge
of dash panel.
4. Align lower end of bib and insert
screw at base of gas tank,
tighten. Tighten screws at front
end of dash panel.
5. Replace seat.