Mustang Motorcycle Seats Two-Piece Vintage Seat - Yamaha Road Star Warrior, No Studs - Manual

Mounting Suggestions for the Yamaha
Road Star Warrior 2002-2003 Two-Piece
Seat
Tools Required:
• Metric Sockets
Hardware:
• Stock Rear 6 mm Allen Bolts
• Stock Rear Fender Screw
• Nylon Washer x1 (Included)
Baseplate Features:
The two-piece, marine-grade fiberglass baseplate is a direct
replacement for the stock one-piece seat. Rubber bumpers are
positioned to protect the frame and fender.
Stock Seat Removal Steps
1. Turn Key to release nose.
2. Slide seat forward and up.
3. Remove tool bag from frame.
4. Re-attach elastic strap.
Step 1 Step 2
Step 3 Step 4