Mustang Motorcycle Seats Tank Bib, Studded with Pouch for Yamaha Venture User Manual
Mustang Motorcycle Seats For motorcycles
Installation Instructions for Mustang
Tank Bib
on 1999-2011 Yamaha Venture
These steps are guidelines to help you install your new Mustang product. If you need
further assistance please call us at 800-243-1392, Monday through Friday 9:00 - 5:30
Eastern or send an e-mail to
or visit our website
at
www.mustangseats.com.
For care and maintenance of our seats, please go to our website under
"Support".
Ref. part #’s 93215, 93216, 93346, 93347
Installation of tank bib
1. Remove the gas cap; remove the two screws from the
dash panel. Remove dash panel from gas tank.
2. Lay tank bib cutouts over filler opening and two dash
panel mounts.
3. Reinstall the dash panel and tighten both screws. Re-
place gas cap.
4. Remove tank mounting bolt at base of gas tank. Put the
rubber washer onto the bolt, then push the bolt through the
opening in the end of the tank bib and tighten.