Mustang Motorcycle Seats Studded Fender Bib - Honda Fury User Manual
Mustang Motorcycle Seats For motorcycles
Installation Instructions for
Mustang Fender bib
on 2010-2011 Honda Fury
These steps are guidelines to help you install your new Mustang product. If you need
further assistance please call us at 800-243-1392, Monday through Friday 9:00 - 5:30
Eastern or send an e-mail to
or visit our website
at
www.mustangseats.com.
For care and maintenance of our seats, please go to our website under
"Support".
Ref. part #’s 78138, 78139
Installation of fender bib
1. Remove screws at back of solo seat.
2. Lift seat up slightly and slide bib into place,
aligning holes in bib with holes in fender.
3. Lower seat onto bib and insert screws;
tighten.
4. Secure rear end of bib with stock fender
screw.
Enjoy the custom look of the
Mustang fender bib on your
Fury.