Mustang Motorcycle Seats Studded Fender Bib - Yamaha Royal Star & Royal Star Tour Deluxe User Manual
Mustang Motorcycle Seats For motorcycles
These steps are guidelines to help you install your new Mustang product. If you need further assistance
please call us at 800-243-1392, Monday through Friday 9:00 - 5:30 Eastern or send an e-mail to
[email protected] or visit our website at www.mustangseats.com.
For care and maintenance of our seats, please go to our website under "Support".
Ref. part #’s 78070, 78071
Mounting Suggestions for the Yamaha
Royal Star 1996-2001 Fender Bib
Tools Required:
• Phillips Screwdriver
Hardware:
• Stock Fender Screw
• Velcro® (Included)
Mounting of Mustang Fender Bib
1. Remove seat.
2. Attach fender bib using supplied Velcro® at front end and single stock fender screw at rear end of
bib.
3. Reinstall solo.
NOTE: Mustang recommends removal of fender bib before reinstalling rear seat.
Mounting a rear seat over a fender bib may result in damage to the bib, poor seat alignment or
other problems.
Enjoy the custom look of your new Mustang Fender Bib!
Studded Fender Bib
Plain Fender Bib