Mustang Motorcycle Seats Vintage Contoured Sissy Bar Pad, 12" x 9, No Studs, No Conchos" - Manual

Mounting Suggestions
Victory Vegas, Kingpin, & 8-Ball 2003-2008
Sissy Bar Pad
Tools Required:
• 4 mm Allen Wrench
• 7/16” Socket
• 5/32” Allen Wrench
• Torque Wrench
Hardware:
• Four Sissy Bar Bolts and washers
(Included)
Step 1
Step 2
Mounting of Mustang Sissy Bar Pad
1. Remove seats mounting bracket from baseplate with 7/16"
socket. Now remove the 2 screws at the back of seat with a 5/32"
Allen wrench.
2. Insert sissy bar through cutout in cover. Reinstall Allen screws
through bar and into seats hidden support bracket. Leave screws
loose for now.
3. Reinstall the four 7/16" seat bracket mounting bolts and leave
loose for now.
4. Install the four 6 mm sissy bar bolts through bracket and into bar.
6 mm bolts should come with sissy bar. Torque the 7/16" bolts to
8 ft. lbs.
5. Mount backrest with supplied chrome 6 mm Allen bolts and
chrome washers. Tighten with a 4 mm Allen wrench.
Enjoy the comfort of your new Mustang Sissy Bar Pad!
Step 3 & 4
Step 5
These steps are guidelines to help you install your new Mustang product. If you need
further assistance please call us at 800-243-1392, Monday through Friday 9:00 - 5:30
Eastern or send an e-mail to [email protected] or visit our website
at www.mustangseats.com.
For care and maintenance of our seats, please go to our website under "Support".
Ref. part #’s