Mustang Motorcycle Seats One-Piece DayTripper Honda VT750C2 Spirit & Shadow Phantom VT750C2 User Manual
Mustang Motorcycle Seats For motorcycles
Removal of Stock Seat:
1. Locate and remove two side mount screws. Metric Allen wrench needed.
2. Locate and remove single rear fender bolt. Metric wrench needed.
3. Lift seat off of bike.
Mounting Suggestions:
Honda VT750C2 Spirit (Shaft) 2007–up
One-Piece Seat
These steps are guidelines to help you install your
new Mustang Product. If you need further assistance,
please call us at 800‐243‐1392 or 860‐582‐9633,
Monday through Friday 9:00 – 5:30 Eastern or send
an e‐mail to
or visit
our website at
.
Refers to part number 76166
Enjoy the comfort of your
new Mustang seat!
Installation of Mustang One‐Piece Seat:
1. Slide front nose tab under gas tank.
2. Align rear tab with fender screw hole.
3. Install and tighten rear fender bolt. Metric wrench needed.
Baseplate Features::
The one‐piece marine‐grade baseplate is a direct replacement of
the stock two‐piece seat.