Mustang Motorcycle Seats Vintage Sissy Bar Pad with Built-in Extension - Harley-Davidson Softail Deuce, No Studs User Manual
Mustang Motorcycle Seats For motorcycles
Mounting Suggestions:
Harley-Davidson® Softail Deuce 2000-2007
Sissy Bar Pad with built-in extension
These steps are guidelines to help you install your new Mustang Product. If
you need further assistance, please call us at 800‐243‐1392 or 860‐582‐9633,
Monday through Friday 9:00 – 5:30 Eastern or send an e‐mail to
or visit our website at
.
For care and maintenance of our seats, please go to our website under
.
Ref part #79081, 79082
Enjoy the look of your new Mustang Sissy Bar Pad
Installing the Mustang sissy bar pad requires
that the Harley-Davidson® Chrome Passenger
Sissy Bar Upright #51114-00 be mounted to the
fender.
Mustang sissy bar pads have a top bolt that is 5/16”x18x3/4” with a washer and a
bottom bolt that is 5/16”x18x1”with two washers and an acorn nut. The bottom bolt
can be installed with the acorn nut facing front or back.
Bottom bolt with acorn nut facing front.
The Harley-Davidson® Chrome Luggage Rack #53806-00 comes complete with (2)
3/8”x16x1.25” bolts and lock nuts and will mount with the Mustang sissy bar pad.
The top bolt provided with the pad is used.
When installing the luggage rack the material must be punched
for the second bolt.