Mustang Motorcycle Seats Studded Fender Bib - Yamaha V-Star 650 User Manual
Mustang Motorcycle Seats For motorcycles
These steps are guidelines to help you install your new Mustang product. If you need further assistance,
please call us at 800-243-1392, Monday through Friday 9:00 - 5:30 Eastern, or send an email to
[email protected], or visit our website at www.mustangseats.com.
Ref part #78077, 78078
Mounting Suggestions
Yamaha V-Star 650 Custom 1998-2009 &
V-Star 1100
Custom 2000-2011 Fender Bib
Tools Required:
• Phillips Screwdriver
Hardware:
• Stock Rear Fender Screw
Mounting of Mustang Fender Bib
1. Remove seat.
2. Attach fender bib using two stock screws in fender at front end and single screw at rear end of bib.
3. Install Solo. NOTE: Mustang recommends removal of fender bib before reinstalling rear seat.
Mounting a rear seat over a fender bib may result in damage to the bib, poor seat alignment or
other problems.
Enjoy the custom look of your new Mustang Fender Bib!
Studded Fender Bib
Plain Fender Bib