Mustang Motorcycle Seats One-Piece Squareback Seat - Suzuki 1400 Intruder & S83 User Manual
Mustang Motorcycle Seats For motorcycles
Advertising
Mounting Suggestions:
Suzuki 1400 Intruder 1987-04 &
S83 2005-09
One-Piece Seat
Baseplate Features:
The one-piece, marine-grade fiberglass baseplate is a
direct replacement for the stock two-piece seat. Rubber
bumpers are positioned to protect the frame and fender.
Stock Seat Removal Steps
1. Unplug the sissy bar pad.
2. Remove the tool kit.
3. Remove the rubber block inside the tool box.
4. Mounting screw will now be exposed; remove this mounting screw.
5. Slide passenger seat forward and up to remove.
6. Unbolt the two 10 mm bolts holding the solo to the fender.
7.
Important: the electronics module is attached to the solo.
Carefully lift solo off the
motorcycle.
8. Carefully remove the electronics module from solo.
Advertising