Mustang Motorcycle Seats One-Piece DayTripper Seat - Harley-Davidson FX - Manual

These steps are guidelines to help you install your new Mustang product. If you need further assistance,
please call us at 800-243-1392, Monday through Friday 9:00 - 5:30 Eastern, or send an email to
[email protected] , or visit our website at www.mustangseats.com .
For care and maintenance of our seats, please go to our website under "Support" .
Refers to part numbers:76379, 75053, 75442, 75619, 75057, 75060, 75630, 75302, 75511, 75734, 75526
Mounting Suggestions
Harley-Davidson® FX/FL Big Twin 1958-1984
One-Piece Seat
Tools Required:
Phillips Screwdriver
Hardware:
Stock Rear Fender Screw
Baseplate Features:
The baseplate is 16 gauge steel and features a black
powder coat and carpet. Rubber bumpers prevent the
baseplate from touching the frame or fender. The
chrome rear tab matches stock fender hole.
Stock One-Piece Seat Removal Steps
1. Remove rear fender screw located behind the passenger seat and set aside. The stock rear
fender screw will be used to attach your new Mustang One-Piece Seat.
2. Slide seat back and up.
Mounting of Mustang Seat
1. Slide front forks under frame.
2. Align rear tab with stock fender hole.
3. Secure in place with stock fender screw to complete the installation process.
Enjoy the Comfort of your new Mustang Seat!
Updated 10/13/10 AA