Mustang Motorcycle Seats Triumph Bonneville, Bonneville T100, Bonneville SE, Scrambler & Thruxton Ribbed Sissy Bar Pad User Manual
Enjoy your new mustang seat
Mounting Suggestions
Triumph Bonneville, T100,
Scrambler, Thruxton 2001 – 2013
Bonneville SE 2012
One-Piece Seat
Removal of Stock Seat (Tools Needed 5mm
Allen wrench)
1. Remove two stock 6mm Allen bolts from
under the rear of the stock seat. These will
be used to install your Mustang seat.
2. Lift the rear of the seat up and back to
disengage the nose mount.
These steps are guidelines to help you install your new Mustang
product. If you need further assistance please call us at 800-243-1392,
Monday through Friday 9:00 - 5:30 Eastern or send an e-mail to
For care and maintenance of our seats, please go to our website under
Ref: part #s 76827, 76828
Installation of Mustang Seat
1. Insert the nose bracket of your Mustang seat
into the frame receptacle, just as stock was
installed.
2.
Secure rear of seat with two stock Allen bolts.
Enjoy your new Mustang Seat!