Mustang Motorcycle Seats Studded Fender Bib - Yamaha V-STAR 1100 Silverado - Manual

These steps are guidelines to help you install your new Mustang product. If you need further assistance,
please call us at 800-243-1392, Monday through Friday 9:00 - 5:30 Eastern, or send an email to
[email protected], or visit our website at www.mustangseats.com.
For care and maintenance of our seats, please go to our website under "Support".
Ref part #78082, 78083
Mounting Suggestions
Yamaha V-Star 1100 Classic 2000-20
11
Fender Bib
Tools Required:
• Phillips Screwdriver
Hardware:
• Stock Rear Fender Screw
Mounting of Mustang Fender Bib
1. Remove seat.
2. Position fender bib so that front hole lines up with solo seat mounting hole.
3. Install solo.
4. Attach rear of fender bib with stock seat rear screw.. NOTE: Mustang recommends removal of
fender bib before reinstalling rear seat. Mounting a rear seat over a fender bib may result in
damage to the bib, poor seat alignment or other problems.
Enjoy the custom look of your new Mustang Fender Bib!
Studded Fender Bib Plain Fender Bib