Mustang Motorcycle Seats Studded Pouch Tank Bib - Honda VTX 1800 Retro, S, T & N - Manual

These steps are guidelines to help you install your new Mustang product. If you need further assistance, please call us at 800-243-1392,
Monday through Friday 9:00 - 5:30 Eastern, or send an email to [email protected], or visit our website at www.mustangseats.com.
For care and maintenance of our seats, please go to our website under "Support".
Ref part #93175, 93176, 93320, 93321
Mounting Suggestions for the Honda VTX
1800 Retro, N, S & T 2002-2008 Tank Bib
Mounting of Mustang Tank Bib
1. Remove seat.
2. Remove gas cap and three rearmost Allen screws from
dash.
3. Lift dash up approximately 3" off tank. Place bib on tank
with large hole of bib around gas filler hole and stretch
smaller hole around and under dash mounts.
4. Reinstall dash with three mounting screws and gas cap.
5. Secure bottom of bib around frame using supplied ties.
Reinstall seat.
Step 2
Step 3
Step 4
Step 5
Enjoy the custom look of your Mustang Tank Bib!
Plain Studded