Mustang Motorcycle Seats One-Piece DayTripper Seat - Suzuki Boulevard M50 User Manual
Mustang Motorcycle Seats For motorcycles
Advertising
Installation Instructions for Mustang
One-Piece Seat
on 2005-2011 Suzuki M50
Stock seat removal
1. Remove stock fender screw at back of rear seat.
2. Lift back end of rear seat and pull seat back and off of its
mounting bracket.
3. Unscrew and remove the bracket from the fender as shown.
This bracket held the front of the rear seat, the handstrap,
and secured the rear of the driver’s seat. It is not used with
the Mustang seat.
4. Lift the rear of the driver’s seat and pull the seat back and off
of the frame.
Advertising