Mustang Motorcycle Seats Studded Fender Bib - Honda VT1100 Aero - Manual

These steps are guidelines to help you install your new Mustang product. If you need further assistance,
please call us at 800-243-1392, Monday through Friday 9:00 - 5:30 Eastern, or send an email to
[email protected], or visit our website at www.mustangseats.com.
For care and maintenance of our seats, please go to our website under "Support".
Ref part #78085, 78086
Mounting Suggestions:
Honda VT1100 Aero 1998-02
Fender Bib
Mounting of Mustang Fender Bib
1. Remove seat.
2. Secure rear of bib to fender with stock fender screw.
3. Center bib on fender and attach front of bib with supplied
Velcro®.
4. Reinstall solo.
NOTE: Mustang recommends removal of fender bib before
reinstalling rear seat. Mounting a rear seat over a fender bib
may result in damage to the bib, poor seat alignment or
other problems.
Enjoy the custom look of your Mustang Fender Bib!
Plain
Studded