Mustang Motorcycle Seats Wide Touring One-Piece Vintage Seat - Honda VF750 Magna, No Studs, No Conchos - Manual

Mounting Suggestions
Honda VF750 Magna 1994-2003
One-Piece Seat
Baseplate Features:
The one-piece, marine-grade fiberglass baseplate directly
replaces the stock two-piece seat. Rubber bumpers are
positioned to protect the frame and fender.
Stock Seat Removal
1. Remove rear fender screw.
2. Remove the mountin gbolt on each side of seat.
3. Slide seat back and up.
Mounting of Mustang Seat
1. Engage nose bracket under frame.
2. Supplied nylon washer goes between rear chrome triangle and fender.
3. Secure seat at rear with stock rear fender screw.
Note: Mustang’s baseplate is engineered to allow clearance for plastic tabs on
side covers. Side bolts are not utilized.
These steps are guidelines to help you install your new Mustang product. If you need further
assistance, please call us at 800-243-1392, Monday through Friday 9:00 - 5:30 Eastern, or
send an email to [email protected], or visit our website at
www.mustangseats.com.
For care and maintenance of our seats, please go to our website under "Support".
Ref part #75209, 75210, 75211, 79288, 79289
Enjoy the comfort of your
new Mustang Seat!