Mustang Motorcycle Seats One-Piece Regal Duke Seat - Harley-Davidson Dyna Glide - Manual

These steps are guidelines to help you install your new Mustang product. If you need
further assistance please call us at 800-243-1392, Monday through Friday 9:00 - 5:30
Eastern or send an e-mail to
[email protected] or visit our website at
www.mustangseats.com
.
For care and maintenance of our seats, please go to our website under "Support".
Ref part #'s 75679, 75689, 75681, 75745, 75685, 75680, 75686
Mounting Suggestions
Harley-Davidson® Dyna Glide &
Dyna Wide Glide 1991- 1995
One-Piece Seat
Tools Required:
• Phillips Screwdriver
Hardware:
•
Stock Rear Fender Screw •
Short Chrome Bracket for Dyna Glide
(Included)
• Long Chrome Brac
k
et for Dyna Wide Glide
(Included)
Baseplate Features:
One-piece formed steel baseplates have rubber bumper
supports at contact points. Two brackets are supplied
that bolt to the rear of the Mustang seat. Use the long
bracket for Dyna Wide Glide models and the short
bracket for standard Dyna Glide models.
Removal of Stock Seat
1. Remove rear fender screw and set aside. The stock rear fender screw will be used to attach your
new Mustang One-Piece Seat.
2. If applicable, remove seat strap.
3. Slide seat back and lift up.
Dyna Glide Bracket Shown
Fig. I
Mounting of Mustang Seat
1. Secure rear bracket to baseplate of passenger seat with
supplied screws. Use long bracket for Dyna Wide Glide
models and short bracket for Dyna Glide models. (Fig. I)
2. Engage nose bracket under welded frame tab.
3. Align chrome rear tab located at back of passenger seat
with hole in fender.
4. Secure with stock fender screw to complete the installation
process.
Enjoy the Comfort of your new Mustang Seat!