Mustang Motorcycle Seats One-Piece DayTripper Yamaha Stryker - Manual

Page 1 of 2
Mounting Suggestions:
Yamaha Stryker 2011
One-Piece Seat
Removal of Stock Seat:
1. Use ignition key to unlatch front of driver’s seat.
2. Lift nose of seat up and forward to release seat
from center hook bracket.
3. When the center of the seat is free, pull the whole
seat back off of the rear fender bracket.
Baseplate Features:
The one-piece, marine-grade fiberglass
baseplate directly replaces the stock
seat. Rubber bumpers are positioned to
minimize vibration and protect the frame
and fender.
Mounting of Mustang Seat:
1. Remove the stock center mounting bracket
from the rear fender.
2. Replace the two stock bolts into the fender
and tighten.