AEG SF2000 - Manual (Page 19)

Getting started
GB
3. Put the two filters in the juice
collector, the large filter should fit
securely onto the clutch. The small
filter fits inside the large filter. Make
sure they lock into place (“click”).
1. The appliance will only function
if all parts have been properly
assembled and the lid has been
properly locked in place with the
handle.
2. Place the juice collector into the
appliance.
4. Place the pulp container into the
appliance by tilting it forwards
slightly. Insert the top first and then
push the bottom end.
6. Slide the pusher into the feeding
tube by aligning the groove in the
pusher with the small protrusion on
the inside of the feeding tube.
5. Hold the lid over the filter and
lower it into position, snap the
handle onto the lid to lock it into
place (“click”). Make sure the handle
is locked into position on both side of
the lid.
D
GR
NL
F
GB
19