Pro Series 1370600 BIKE CARRIER AXIS 3 - Manual

:
:
1370600
Cequent Performance Products
47774 Anchor Court
Plymouth, MI 48170
Technical Service: (888) 521-0510
1370600N Rev A 09-09
Printed in Taiwan
Trunk Mount 3 Bike Carrier
Assembly Instructions:
1. Align mounting holes of upper support tube with holes in main support assembly. Use a supplied ¼
carriage bolt and ¼ Nylon locking nut to fasten upper support tube to main support. DO NOT OVER
TIGHTEN. Support tube must be able to rotate freely. (Fig 1)
2. Align mounting holes in upper support tube with adjustment slot in main support assemble. Use a
supplied ¼ carriage bolt and adjustment knob, to fasten tube to main support. (Fig 1)
3. Repeat steps 1 & 2 for lower support tube.
4. Pass side cam buckle straps through side strap slots on main support assembly side brackets and
through slot on trunk hook. (Fig 3)
5. Thread upper / lower hook straps through cam buckles of main support assembly. (Fig 2)
¼ Carriage Bolt
Page 1 of 12
FIGURE 1
Adjustment Knob
¼ Nylon Lock Nut
Upper Support Tube
Lower Support Tube
¼ Carriage Bolt
Adjustment Knob
¼ Carriage Bolt
Kit Contents:
Main Support Assembly 1 Side Cam Buckle Straps 2
Upper Support Tube 1 Trunk Hook 2
Lower Support Tube 1 Adjustment Knobs 4
Upper / Lower Hook Straps 4 ¼-20 x 1 ½ Carriage Bolt 8
Cradle Strap 6 ¼-20 Lock Nut 4
ITEM
DESCRIPTION
Main Support Assembly