Universal Audio Apollo Software - Manual (Page 38)

Apollo Software Manual Chapter 3: Console Application 38
Input Pan
This control adjusts the input’s position in the stereo panorama
of the monitor mix bus.
When the input is stereo linked, two pan knobs appear for the
channel – one for each of the left and right channels – enabling
independent panning for both the left and right channels. When
stereo link is activated, the default position of the dual pan
knobs are hard left/right.
Input Mute
Mute stops the input channel’s signal from being routed to the monitor mix bus and
the aux buses, but not the headphone (Apollo) or cue (Apollo 16) buses. The chan-
nel is muted when the mute button is red. The input meter is still active when the
channel is muted for a visual reference that there is still a signal coming into the
channel even though it isn’t heard in the monitor mix.
Tip: Option-click the mute button to toggle mute on multiple channels.
If Solo is activated on the same channel when muted, the mute state is overridden and the
channel is heard in the monitor mix.
Note: Input mute does not affect the channel input headphone or cue sends.
Input Solo
Solo mutes all input signals, except for any inputs in solo mode. Solo is used to
highlight individual channels in the mix without having to modify other channels.
Tip: Option-click the solo button to toggle solo on multiple channels.
The channel is solo’d when its solo button is yellow. Activating mute on a channel has no
effect if the channel is in Solo mode.
Note: Input solo does not affect the channel’s headphone sends (Apollo) or cue sends
(Apollo 16).
Pan with channels unlinked
(left) and linked (right)