Procom FSP 70-tetra-desk-stand - Manual

FSP 70/TETRA-DESK STAND
End-Fed ½ λ Dipole Antenna for Portable Equipment in
TETRA Band
DESCRIPTION
Highly flexible polyethylene covered StraightFlex steel wire (self-
straightening).
Full-size, end-fed ½ λ antenna whip.
High gain and efficient decoupling from the portable equipment.
0 / 2.15 dBi gain compared to a base station antenna.
Highest quality materials in an elegant design.
Delivered factory tuned and tested to ensure minimum SWR and
optimum performance.
Provided with 4 m cable with FME connector.
ORDERING DESIGNATIONS
TYPE PRODUCT NO.
FSP 70/TETRA-DESK STAND 140000401
SPECIFICATIONS
ELECTRICAL
MODEL FSP 70/TETRA-DESK STAND
ANTENNA TYPE ½ λ antenna for portable equipment
FREQUENCY TETRA (380 - 400 MHz)
other frequencies on request
IMPEDANCE Nom. 50 Ω
POLARIZATION Vertical
GAIN 0 dBd / 2.15 dBi (compared to ½ λ dipole)
BANDWIDTH ≥ 30 MHz @ SWR ≤ 2.5
SWR < 1.3 @ f. res.
MAX. POWER 25 W
MECHANICAL
MATERIALS Polyethylene covered flexible steel wire
Black-chromed brass
COLOUR Black
TOTAL HEIGHT Approx. 394 mm
WEIGHT Approx. 150 g
CONNECTOR 4 m RG 58 low loss cable with
FME (female) connector
TYPICAL SWR CURVE