Procom PRO-phy85-3 - Manual

PRO-PHY85-3
3-Channel Hybrid Combiner for 85 MHz Transmitters
DESCRIPTION
Combining three transmitters or receivers on the same antenna.
Better utilization of good antenna position.
Three antennas on the same transmitter or receiver.
The only combining option with very small TX-TX frequency spacing.
60 W load supplied (other loads or no load as option).
ORDERING DESIGNATIONS
TPYE FREQ. RANGE PRODUCT NO.
PRO-PHY85-3-1 67 - 71 MHz 210000785
PRO-PHY85-3-2 70 - 74 MHz 210000736
PRO-PHY85-3-3 73 - 77 MHz 210000549
PRO-PHY85-3-4 76 - 80 MHz 210000703
PRO-PHY85-3-5 79 - 83 MHz 210000737
PRO-PHY85-3-6 82 - 86 MHz 210000693
PRO-PHY85-3-7 85 - 89 MHz
SPECIFICATIONS
ELECTRICAL
FILTER TYPE Hybrid Junction
FREQUENCY 68 - 88 MHz (see table)
MAX. INPUT POWER 75 W per channel
(max. 150 W with larger load)
INSERTION LOSS < 5.2 dB ± 0.3 dB @ 2 MHz BW
< 5.4 dB ± 0.3 dB @ 4 MHz BW
ISOLATION TX
1
-TX
2
(*see note)
> 26 dB @ 2 MHz BW
> 25 dB @ 4 MHz BW
IMPEDANCE Nom. 50 Ω
LOAD (**see note) 60 W load fitted (other ratings available)
SWR < 1.5 with all other ports terminated with 50 Ω
MECHANICAL
TEMP. RANGE –30° C → +60° C
CONNECTORS N-female (other types available)
DIMENSIONS (L x W x H) 400 x 89(incl. conn.) x 42 mm (excl. loads)
WEIGHT Approx. 1300 g (excl. load)
* The isolation between the TX ports is directly dependent on the
terminating SWR on the antenna port. With an antenna load SWR = 1.5, the
isolation between the two TX ports will be reduced to 20 dB @ 5 MHz
bandwidth.
** The SWR of the load´s should be < 1.1! Each load should be able to
dissipate 2/3 of the input power.
E.g.: With 50 W input, each load should be able to dissipate 50 W x 2/3 =
33 W.
TYPICAL RESPONSE CURVE
PROCOM A/S reserve the right to amend specifications
without prior notice.
14/10/11