Procom CXL 2400-6-... - Manual

CXL 2400-6/...
6 dBd Omnidirectional Base Station and Marine Antenna for
the 2400 MHz Band
DESCRIPTION
Vertically polarized, omnidirectional base station antenna and marine.
Approximately 6 dBd gain.
Simple mounting using the 1” revolving nut system.
Wide variety of accessory mounting brackets available.
Large bandwidth with respect to both SWR and gain.
Highly suitable for duplex operation with large spacing between the TX
and the RX frequencies.
The antenna element is sealed in a high-quality, conical glass fibre tube.
All metal parts in the antenna are DC-grounded to reduce the noise
caused by atmospherical discharge. Consequently, the antenna shows a
DC-short across the coaxial cable.
The CXL 2400-6/… is a vibration-proof, lightweight, slim-line, corrosion
resistant, modern style base station antenna and marine.
ORDERING DESIGNATIONS
TYPE PRODUCT NO. FREQUENCY
CXL 2400-6/ll 100000432 2200 - 2300 MHz
CXL 2400-6/l 110000161 2300 - 2500 MHz
CXL 2400-6/m 110000163 2400 - 2600 MHz
CXL 2400-6/h 110000162 2500 - 2700 MHz
SPECIFICATIONS
ELECTRICAL
MODEL CXL 2400-6/...
ANTENNA TYPE Coaxial, collinear antenna, broad-banded
FREQUENCY Models within 2200 – 2700 MHz
IMPEDANCE Nom. 50 Ω
POLARIZATION Vertical
GAIN 8 dBi 6 dBd
BANDWIDTH ≥ 200 MHz @ SWR ≤ 2.0
SWR ≤ 2.0, typ. ≤ 1.5
MAX. POWER 100 W
ANTISTATIC PROTECTION All metal parts DC-grounded
(Connector shows a DC-short)
MECHANICAL
TEMP. RANGE -30°C → +70°C
CONNECTOR N-female
WIND SURFACE Approx. 0.03 m²
WIND LOAD Approx. 38 N @ 160 km/h
COLOUR Marine white
MATERIALS Shroud: Polyurethane-coated glass fibre
Mounting bracket: Chromed brass
TOTAL HEIGHT Approx. 1.15 m
DIA. IN TOP END 21 mm
DIA. IN BOTTOM END 23 mm
WEIGHT Approx. 600 g
MOUNTING On 1” RG (G1”-11) threaded water pipe or
on optional mounting brackets (see below)
ACCESSORIES (to be ordered separately)