Procom PRO-arhp16-4-gs-n - Manual

PRO-ARHP16-4-GS-N
19" Rack-Mountable High-Performance 16-Channel RX-
Multicoupler
DESCRIPTION
Short wave receiver multicoupler with 4 inputs and 16 outputs.
Covers the HF-frequencies 100 kHz - 40 MHz.
Ultra-high dynamic range amplifier to compensate for loss in
multicoupler network.
Ultra-high third-order intercept point: > +30 dBm.
P
1dB
> +20 dBm.
Low noise figure: < 3.5 dB for amplifier.
Built-in signal limiter protecting the input from signal voltage larger than
10 Vpp.
Static discharge protected by gas discharge tube across the input.
High isolation between the 16 receiver outputs: > 20 dB.
Galvanically isolated 230 VAC/12 VDC power supply (24 V as option).
Automatic switching to 12 V if 230 V mains supply fails.
19" rack module housing.
Only 3 HU (3 height unit HU = 133.35 mm).
N-female connectors on inputs and outputs (other types as option).
Available with connectors on front.
"POWER ON" lamp on front.
230 VAC IEC connector CEE22 fitted with mains filter.
12 VDC terminal connector block fitted with noise filter.
ORDERING DESIGNATIONS
TYPE PRODUCT NO.
PRO-ARHP16-4-GS-N 210000364
SPECIFICATIONS
ELECTRICAL
MODEL PRO-ARHP16-4-GS-N
FREQUENCY RANGE 100 kHz - 40 MHz
GAIN INPUT
TO ALL OUTPUTS
2 dB ± 2 dB
NOISE FIGURE
AMPLIFIER
< 3.5 dB @ 10 MHz
NOISE FIGURE
OUTPUTS
< 5.5 dB @ 10 MHz
3 rd ORDER
INTERCEPT POINT
> +30 dBm
P 1dB
> +20 dBm
INPUT SWR Max. 2.5, typically < 1.5
OUTPUT SWR Max. 2.0, typically < 1.5
ISOLATION OUTPUT
TO OUTPUT
> 20 dB
ISOLATION OUTPUT
TO INPUT
> 30 dB
VOLTAGE 230 V @ 0.1 A / 12 V @ 1.8 A
MECHANICAL
DIMENSIONS
(W x H x D)
19'' x 3 HU x 261 mm
(483 x 133.35 x 261 mm)
WEIGHT Approx. 4.4 kg
PROCOM A/S reserve the right to amend specifications
without prior notice.
08/12/11