Procom LPZ 1300 - Manual

LPZ 1300
Coaxial Low-Pass Filter for the 1300 MHz Band
DESCRIPTION
Passes all signals in or below the 1100 - 1300 MHz band.
Rejects signals above this range.
Absolute stop band from 2.5 GHz to 12.4 GHz
- no degradation at harmonics (Zolotarev-characteristic).
Attenuation in stop band better than 60 dB.
Insertion loss in pass range less than 0.4 dB.
Provided with brackets for panel mounting.
ORDERING DESIGNATIONS
TYPE PRODUCT NO.
LPZ 1300 200001292
SPECIFICATIONS
ELECTRICAL
MODEL LPZ 1300
APPLICATION Low-pass filter for the 1300 MHz band
FREQUENCY Pass band: 1100 - 1300 MHz
Stop band: 2.5 - 12.4 GHz
MAX. INPUT POWER 150 W
INSERTION LOSS (PASS BAND) ≤ 0.4 dB
ATTENUATION (STOP BAND) > 60 dB
MECHANICAL
TEMP. RANGE –30° C → +80° C
CONNECTORS N-female
DIMENSIONS (L x W x H) 108 x 40 x 36 mm
WEIGHT Approx. 80 g
TYPICAL RESPONSE CURVES
The LPZ 1300 is used to prevent RFI (Radio Frequency Interference) caused
by excessive harmonic generation from transmitters operating in the 1100 -
1300 MHz band. By rejection, the filter reduces the amplitude of the
harmonics and prevents them from being radiated by the antenna.
The filter is normally used in connection with base station transmitters, but
as it is mechanically very ruggedly designed, it is perfectly suited for mobile
and marine applications as well.
PROCOM A/S reserve the right to amend specifications
without prior notice.
22/08/13