Procom BPF 1800-9 - Manual

BPF 1800/9
Interdigital Band-Pass Filter for the 1800 MHz Band
DESCRIPTION
The BPF 1800/9 is a 9-resonator, interdigital band-pass filter for
multichannel systems in the 1800 MHz band.
Using interdigital principles the following features are obtained at the
same time:
Wide Pass Range
Low insertion loss and ripple inside pass range
Steep slopes immediately outside pass range
Heavy attenuation outside the pass range.
The BPF 1800/9 housing is made of silvered brass. Careful design and
choice of materials ensure a long lifetime and reliable operation over a
wide temperature range.
The filter can be delivered with centre frequency between 1740 and
1840 MHz.
The specifications and the curves below refer to a filter with 60 MHz
port width, but interdigital filters with other port widths and filter
characteristics may be quoted on request.
ORDERING DESIGNATIONS
TYPE PRODUCT NO.
BPF 1800/9 L 200000951
BPF 1800/9 H 200000948
SPECIFICATIONS
ELECTRICAL
MODEL BPF 1800/9
FILTER TYPE Interdigital band-pass filter
CENTRE FREQUENCY To be stated within 1740 - 1840 MHz
MAX. INPUT POWER 100 W
PASS RANGE WIDTH 60 MHz (others on request)
INSERTION LOSS ≤ 1.0 dB, typ. 0.9 dB
ATTENUATION AROUND PASSBAND ± 50 MHz rel. f c : > 30 dB
± 80 MHz rel. f
c
: > 80 dB
ATTENUATION OUTSIDE
PASS-RANGE, 0-2 GHz
> 70 dB, typ. > 100 dB (see curves)
IMPEDANCE Nom. 50 Ω
SWR ≤ 1.5
MECHANICAL
TEMP. RANGE –30° C → +60° C
FREQ. STABILITY Approx. 8ppm/° C
CONNECTORS N-female or 7/16-female
DIMENSIONS (L x W x H) 360 x 75 x 32 mm
WEIGHT Approx. 2.2 kg
TYPICAL RESPONSE CURVES
PROCOM A/S reserve the right to amend specifications
without prior notice.
16/03/11