Procom FSP 1300-...-fme - Manual

FSP 1300/...-FME
End-Fed ½ λ Dipole Antenna with Universal FME-
Connection System for Portable Equipment in the 1300
MHz Band
DESCRIPTION
Highly flexible polyethylene covered StraightFlex steel wire (self-
straightening).
Full size, end-fed ½ λ antenna whip – groundplane independent.
High gain and efficient decoupling from the portable equipment due to
half-wave design.
5 dB gain (typ.) compared to a ¼ λ antenna whip on the same
equipment.
Highest quality materials in a slender and elegant design.
Delivered factory tuned to customer specified frequency.
Provided with universal FME-connection system for optimum flexibility
and easily exchangeable connectors.
Designed for use with the following of Procom's line of black FME-
connectors (to be ordered separately): BFME-BNC, BFME-TNC, BFME-N,
BFME-MUHF, BFME-EBNC, BFME-ETNC and BFME-EMUHF.
ORDERING DESIGNATIONS
TYPE PRODUCT NO.
FSP 1300/...-FME 140000232
SPECIFICATIONS
ELECTRICAL
MODEL FSP 1300/...-FME
ANTENNA TYPE End-fed ½ λ antenna for portable equipment
FREQUENCY 1300 MHz band (1200 – 1300 MHz)
IMPEDANCE Nom. 50 Ω
POLARIZATION Vertical
GAIN 5 dB (compared to a ¼ λ portable antenna)
BANDWIDTH ≥ 70 MHz @ SWR ≤ 2.0
SWR < 1.3 @ f. res.
MAX. POWER 25 W
MECHANICAL
MATERIALS Polyethylene covered flexible steel wire
Black-chromed brass
COLOUR Black
TOTAL HEIGHT Approx. 150 mm
WEIGHT Approx. 25 g
CONNECTOR FME (female) (Exchangeable BFME-connectors
to be ordered separately)
TYPICAL SWR CURVE
RECOMMENDED BFME-CONNECTORS
(To be ordered separately)
PROCOM A/S reserve the right to amend specifications
without prior notice.
27/07/12