Procom DM-1532 - Manual

DM 1532
Hand-Held Microphone for Mobile Equipment
DESCRIPTION
General-purpose dynamic hand microphone.
Used in conjunction with radio telephones in vehicles, ships and
aircrafts.
Sturdy ABS microphone housing.
Hang-up hook on the back of housing.
Built-in switch for control of auxiliary circuits.
Hang-up clips available (Danmike Accessory items
DM 300900 or DM 400900).
ORDERING DESIGNATIONS
TYPE NO. PRODUCT NO.
DM 1532 270000031
When the push-to-talk switch is depressed, the control circuit is closed before
the microphone circuit is closed.
SPECIFICATIONS
ELECTRICAL
MODEL DM 1532
TYPE Dynamic hand-held microphone
POLAR PATTERN Non-directional
IMPEDANCE 200 Ω ± 30% at 1 kHz
FREQ. RESPONSE Shown in diagram below
SENSITIVITY -55 dB ± 3 dB at 1 kHz rel. 1 V/Pa
CARTRIDGE TYPE Dynamic
MECHANICAL
CABLE 3-wire coiled cord with shield. Extended: 1.2 m
SWITCH Push-to-talk and switching of auxiliary circuit
ACCESSORIES Hang-up clips type DM 300900 or DM 400900
TEMP. RANGE Operating : -25° C to + 55° C
Storage : -40° C to + 55° C
MATERIALS Black ABS resin
DIMENSIONS 103 (H) x 65 (W) x 67 (D) mm
WEIGHT Approx. 160 g
PROCOM A/S reserve the right to amend specifications
without prior notice.
04/04/13