Procom CXL 70-5SL-... User Manual

Cxl 70-5sl

Advertising
background image

CXL 70-5SL/...

Sturdy, 5 dBd, Omnidirectional Base Station Antenna for the

TETRA Bands

DESCRIPTION

CXL 70-5SL/… is an 5 dBd, vertically polarized, omnidirectional base

station antenna for the TETRA bands.
The antenna has a band width of 20 MHz.
The antenna is provided with our type "SL" (Slim Line) mast mount,

which is a multipurpose mounting tube made of non-corrosive

aluminium. The accompanying clamp set and fittings are made of hot

galvanized steel.
The antenna can be mounted on mast tubes of 33 to 70 mm in outer

diameter.
The antenna element is sealed in a high-quality, conical glass fibre tube

with low wind-load, which will ensure performance undisturbed in all

climates.
To substantially reduce noise caused by atmospherical discharges, all

metal parts in the antenna are DC-grounded. Consequently, the antenna

shows a DC-short across the coaxial cable.
CXL 70-5SL/… is a vibration-proof, slim-line, corrosion-resistant, modern

style base station antenna.

*

The top of the mounting SL tube must be in alignment with the top of the

mast.

ORDERING DESIGNATIONS

TYPE

PRODUCT NO.

FREQUENCY

CXL 70-5SL/l

100000326

380 - 400 MHz

CXL 70-5SL/h

100000327

410 - 430 MHz

SPECIFICATIONS

ELECTRICAL

MODEL

CXL 70-5SL/...

ANTENNA TYPE

High-gain collinear

FREQUENCY

380 - 400 MHz and 410 - 430 MHz

IMPEDANCE

Nom. 50 Ω

RADIATION

Omnidirectional

POLARIZATION

Vertical

GAIN

7 dBi 5 dBd

HALF POWER BEAMWIDTH

15°

BANDWIDTH

20 MHz

SWR

≤ 1.5

MAX. POWER

250 W

ANTISTATIC PROTECTION

All metal parts DC-grounded

(Connector shows a DC-short)

MECHANICAL

CONNECTOR

N-female

WIND SURFACE

0.21 m²

WIND LOAD

274 N @ 160 km/h

COLOUR

Marine white

MATERIALS

Radome: Polyurethane-coated glass fibre

Procom clamp set: Hot galvanized steel

TOTAL HEIGHT

Approx. 3.2 m

WEIGHT

Approx. 5.3 kg (8 kg incl. clamp set)

MOUNTING

On 33 - 70 mm dia. mast tube

ENVIRONMENTAL

TEMP. RANGE

-30°C → +70°C

PROCOM CLAMP SET

PLEASE NOTE

When using the CXL 70-5SL/… at windy locations where wind speeds of

more than 150 km/h can be expected, the antenna must be mounted on the

side of the mast and the top section of the glass fibre tube stabilized with a

bracket.

Advertising