Procom HX 70-...-fme - Manual

HX 70/...-FME
Antenna with Universal FME-Connection System for
Portable Equipment in the 70 cm Band
DESCRIPTION
Short conical steel helix moulded in flexible thermoplastic rubber.
Reduced-size ¼ λ helical antenna whip.
Optimum performance compared to physical dimensions.
Delivered factory tuned and tested to ensure minimum SWR.
Provided with universal FME-connection system for optimum flexibility
and easily exchangeable connectors.
Designed for use with the following of Procoms line of black FME-
connectors (to be ordered separately): BFME-UHF, BFME-BNC, BFME-
TNC, BFME-N, BFME-MUHF, BFME-EBNC, BFME-ETNC and BFME-
EMUHF.
ORDERING DESIGNATIONS
TYPE PRODUCT NO. FREQUENCY
HX 70/s-FME 140000195 380 – 410 MHz
HX 70/l-FME 140000204 400 – 430 MHz
HX 70/m-FME 140000205 420 – 450 MHz
HX 70/h-FME 140000201 440 – 470 MHz
SPECIFICATIONS
ELECTRICAL
MODEL HX 70/...-FME
ANTENNA TYPE Shortened ¼ λ antenna for portable equipment
FREQUENCY 70 cm band covered by four models
IMPEDANCE Nom. 50 Ω
POLARISATION Vertical
GAIN Approx. -3 dB (equal to a ¼ λ portable antenna
on the same equipment)
BANDWIDTH ≥ 20 MHz @ SWR ≤ 2.0
SWR <1.5 when mounted directly on portable equipment
MAX. POWER 50 W
MECHANICAL
MATERIALS Steel helix moulded in flexible thermoplastic rubber
Black-chromed brass
COLOUR Black
TOTAL HEIGHT Approx. 65 mm (dep. on type)
WEIGHT Approx. 20 g
CONNECTOR FME (female) (Exchangeable BFME-connectors
to be ordered separately)
RECOMMENDED BFME-CONNECTORS
(To be ordered separately)
PLEASE NOTE
The HX 70 is also available with SMA male connector and different thread
studs, but in this case with fixed, non-exchangeable connector (not FME-
connection system). Information on these special versions on request.
PROCOM A/S reserve the right to amend specifications
without prior notice.
16/05/12