Procom PRO 1000 kit - Manual

PRO 1000
Multi-Connector System / Coaxial Adapter Kit
DESCRIPTION
Make your own coaxial adapters with the PRO 1000 kit.
136 different combinations possible.
Save time and money.
Easy and fast connection between different coaxial connectors.
Contains N-, UHF-, MUHF-, BNC-, TNC-, SMA-, F- and Phono-connectors.
Gold plated brass and teflon insulation for optimum electrical
performance.
Indispensable in every radio workshop.
Delivered in handy and protective soft case.
ORDERING DESIGNATIONS
TYPE PRODUCT NO.
PRO 1000 130000590
SPECIFICATIONS
ELECTRICAL
MODEL PRO 1000
APPLICATION Coaxial adaptor kit (N to BNC, TNC to SMA, … etc.)
FREQUENCY
RANGE
N, SMA, BNC, TNC: 0 - 3000 MHz (or above)
MUHF: 0 - 2500 MHz
F: 0 - 1500 MHz
UHF: 0 - 200 MHz
Phono: 0 - 100 MHz
IMPEDANCE Nom. 50 Ω (all connector types)
SWR ≤ 1.5 for the frequencies stated above
(typically ≤ 1.2) See note below
INSERTION LOINS ≤ 0.5 for the frequencies stated above
(typically ≤ 0.2) See note below
MECHANICAL
CONTENTS Two male and two female connector ends of each of the
following:
N-connector
UHF-connector
MUHF-connector
BNC-connector
TNC-connector
SMA-connector
F-connector
Phono-connector
Eight connector joints
MATERIAL Gold-plated brass
Teflon insulation
DIMENSIONS Soft case: 190 mm x 120 mm x 30 mm
Coaxial adapter: Approx. 53 mm x 16 mm dia.
(N: 20 mm dia, UHF: 17 mm dia.)
WEIGHT Complete set (case): Approx. 680 g
PLEASE NOTE
The specifications for SWR and insertion loss are given for a "complete"
adapter (same connector type at each end), ie. two connector ends and one
connector joint.
PROCOM A/S reserve the right to amend specifications
without prior notice.
07/12/11