Procom GPS-C 4-2-tetra-fm-s-bbMU ph-... - Manual

GPS-C 4/2/TETRA-FM-S
BBMU/PH/...
Collinear Mobile Antenna for the 4 m, 2 m, FM and TETRA
Bands
DESCRIPTION
External antenna whip mounted on the GPS-Combi mount.
Polyethylene-covered flexible whip.
Easily removable whip for car wash.
GPS-antenna for fixed installations.Full hemispherical coverage.
Built-in high-gain, low-noise amplifier.
Right-Hand Circular Polarization antenna (RHCP).
5 V supply voltage (3 V respectively 12 V available on request).
DC supply via RF-connector.
Matching unit (BBMU) included.
Matching unit without FM (PH-BOS3 BBMU) available.
SPECIFICATIONS FOR WHIP
ELECTRICAL
MODEL GPS-C 4/2/TETRA-FM-S BBMU/PH/...
ANTENNA TYPE Collinear mobile whip antenna
FREQUENCY 4 m: 74.2 - 87.5 MHz
2 m: 167.5 - 174 MHz
70 cm: 380 - 410 MHz
FM band: 93 - 108 MHz (Limited in 88 - 93 MHz)
SWR 74.2 - 77.7 and 84 - 87.5 MHz: < 2.5
167.5 - 169.5 and 172 - 174 MHz: < 2.0
380 - 400 MHz: < 2.0
400 - 410 MHz : <2.5
880 - 960 MHz: < 2.5
1710 - 1880 MHz: < 4.0
IMPEDANCE Nom. 50 Ω
POLARIZATION Vertical
GAIN 4 m: approx. -8 dB
2 m: approx. -4 dB
70 cm: approx. -3.5 dB (acc. to EIA RS-329-1)
880 - 960 MHz: approx. -10 dB / -12 dB
1710 1880 MHz: approx. -7 dB / -9 dB
MAX. POWER 15 W
MECHANICAL
MATERIALS Whip: Glass fibre whip with copper wire winding,
polyethylene-covered. Black-chromed brass
Spring: Black-chromed stainless steel
COLOUR Black
HEIGHT 575 mm
WEIGHT 60 g
MOUNTING On the GPS-Combi mount
ORDERING DESIGNATIONS
TYPE PRODUCT NO. ROOF THICKNESS
GPS-C 4/2/TETRA-FM-S BBMU/PH 132000106 Max. 2.5 mm
GPS-C 4/2/TETRA-FM-S BBMU/PH/7mm 132000113 3.5 - 7.5 mm
ACCESSORIES
PH-BOS3 BBMU 132000172
SPECIFICATIONS FOR GPS-COMBI MOUNT
ELECTRICAL GENERAL SPECIFICATIONS
MODEL GPS-COMBI MOUNT
ANTENNA TYPE Active patch antenna
FREQUENCY 1575 MHz
IMPEDANCE Nom. 50 Ω
POLARIZATION Circular right-hand
COVERAGE Hemispherical
GAIN 28 dBic in axial direction (typ.)
CROSS-
POLARIZATION ATT.
> 10 dB (typ.)
SELECTIVITY > 45 dB down @ ± 45 MHz
BUILT-IN AMPLIFIER
GAIN > 30 dB (typ.)
NOISE FIGURE < 1 dB (typ.)
P1 dB Approx. +7 dBm
SWR (output) ≤ 2.0
SUPPLY VOLTAGE 5 ± 0.5 VDC (3 V resp. 12 V on request)
CURRENT
CONSUMPTION
Approx. 25 mA
MECHANICAL (ONLY FOR THE GPS-PART)
MATERIALS Cu-nite brass. Stainless steel
Reinforced thermoplastic
ANTENNA COLOUR Black
TEMP. RANGE -35° C →+75° C
CONNECTOR FME (male for GPS) +
FME (female for mobile antenna)
RECOMMENDED
INSTALL. TORQUE
4 ± 0.5 Nm
DIMENSIONS (H x L) Approx. 30 x 89 mm
ROOF THICKNESS Max. 2.5 mm or 3.5 - 7.5 mm
WEIGHT Approx. 114 g
MOUNTING ø18 mm dia. hole for roof thickness up till 2.0 mm
ø18.5 mm dia. hole for roof thickness 2.0 - 2.5 mm
ø19 mm dia. hole for roof thickness 3.5 - 7.5 mm
Tools for mounting included