Procom PRO-bbmphy-450-2-n - Manual

PRO-BBMPHY-450-2-N
Broad Band Power Divider/Combiner
DESCRIPTION
Two antennas connected to the same transmitter or receiver.
Broad band power splitter for radio systems.
Combining two transmitters on the same antenna.
Note: The power splitter has to be mounted on an extra heat sink when
used as a combiner. Max. 15 W per TX.
Combining two signal generators.
30 W load built-in.
ORDERING DESIGNATION
TYPE NO. PRODUCT NO.
PRO-BBMPHY-450-2-N 210000290
SPECIFICATIONS
ELECTRICAL
MODEL PRO-BBMPHY-450-2-N
TYPE Cascaded Wilkinson-hybrid
FREQUENCY 440 - 470 MHz (other frequencies on request)
MAX. INPUT POWER 30 W when used as a power splitter -
15 W per channel when used as a hybrid combiner.
Note: Extra cooling necessary when used as a hybrid
combiner
BANDWIDTH 30 MHz min. Can be extended.
INSERTION LOSS < 3.6 dB, typically < 3.4 dB
ISOLATION TX 1 , TX
2
> 20 dB, typically > 23 dB
PHASE TX 1 , TX 2
0°
IMPEDANCE Nom. 50 Ω
LOAD 30 W load built-in
SWR < 1.5 (typically < 1.35)
MECHANICAL
TEMP. RANGE –30° C → +60° C
CONNECTOR TYPE N-female (other types available)
DIMENSIONS
(L x W x H)
130 (incl. conn.) x 152 x 35 mm
WEIGHT Approx. 400 g
TYPICAL RESPONSE CURVE
PROCOM A/S reserve the right to amend specifications
without prior notice.
01/11/11