Procom MU 1804-lx - Manual

MU 1804-LX
Colinear 3 dB Mobile Antenna for the 1800 MHz Band
DESCRIPTION
Mobile antenna for the 1800 MHz cellular systems (DCS-1800/PCN).
Colinear, stainless steel whip.
3 dB gain compared to a 1/4 λ whip.
Stainless steel LX-mount – professional quality in elegant and smooth
design.
Especially suited for roof-mounting.
Provided with FME-connection (supplied without cable).
Bendable section in mount for adjustment of whip (tiltable 15° by hand).
Installation with access from the outside only (requiring an
18 mm dia. hole).
Ordering designations
TYPE NO. PRODUCT NO.
MU 1804-LX 130001269
SPECIFICATIONS
ELECTRICAL
MODEL MU 1804-LX
ANTENNA TYPE Colinear mobile whip antenna
FREQUENCY 1800 MHz band (1700 – 1900 MHz)
IMPEDANCE Nom. 50 Ω
POLARISATION Vertical
GAIN 3 dB (acc. to EIA RS-329-1)
BAND WIDTH ≥ 200 MHz @ SWR ≤ 2.25
SWR ≤ 2.0 @ f. res.
MAX. POWER 25 W
MECHANICAL
MATERIALS Whip:
Black-chromed brass
Black-chromed stainless steel
Mount:
Stainless steel
Cu-nite brass
Environment-proof plastics
RECOMMENDED
INSTALLATION
TORQUE
3.5 Nm max.
CABLE FME-cable to be ordered separately
COLOUR Black
HEIGHT Approx. 170 mm
WEIGHT Approx. 34 g
MOUNTING 18 mm dia. hole
INSTALLATION
The LX-mount is especially suited for roof-mounting. It is recommended to
mount the antenna at the centre of the roof to ensure the best
omnidirectional coverage. Mounting can take place in an 18 mm dia. hole
with access from the outside only.
When cleaning the car in car-washing machines, the whip should be
removed – a 9 mm fork spanner can be used. After wash, the whip is
refitted and tightened lightly with the spanner.
The mount is equipped with a bendable section (±15°) to make it possible
to adjust the antenna to an upright position.
1. INSTALLATION DIMENSIONS
2. INSTALLATION STEPS