Procom FLX 900-...-fme - Manual

FLX 900/...-FME
End-Fed ½ λ Dipole Antenna with Universal FME-
Connection System for Portable Equipment in the 900 MHz
Band
DESCRIPTION
Flexible antenna made of steel wire covered with black silicone tubing.
End-fed ½ λ whip – groundplane independent.
High gain and efficient decoupling from the portable equipment due to
half-wave design.
5 dB gain compared to a ¼ λ antenna whip on the same equipment.
Highest quality materials in a long-lasting and durable design.
Delivered factory tuned to customer specified frequency or cellular
system.
Provided with universal FME-connection system for optimum flexibility
and easily exchangeable connectors.
Designed for use with the following of Procom's line of black FME-
connectors (to be ordered separately): BFME-BNC, BFME-TNC, BFME-N,
BFME-MUHF, BFME-EBNC, BFME-ETNC and BFME-EMUHF.
ORDERING DESIGNATIONS
TYPE PORDUCT NO. FREQUENCY
FLX 900/...-FME 140000217 820 - 960 MHz
SPECIFICATIONS
ELECTRICAL
MODEL FLX 900/...-FME
ANTENNA TYPE End-fed ½ λ antenna for portable equipment
FREQUENCY 900 MHz band (820 - 960 MHz)
IMPEDANCE Nom. 50 Ω
POLARIZATION Vertical
GAIN 5 dB (compared to a ¼ λ portable antenna)
BANDWIDTH ≥ 70 MHz @ SWR ≤ 2.0
SWR < 1.3 @ f. res.
MAX. POWER 25 W
MECHANICAL
MATERIALS Silicone tube over flexible steel wire
Black-chromed brass
COLOUR Black
TOTAL HEIGHT Approx. 170 mm (dep. on type)
WEIGHT Approx. 25 g
CONNECTOR FME (female) (Exchangeable BFME-connectors
to be ordered separately)
TYPICAL SWR CURVE
RECOMMENDED BFME-CONNECTORS
(To be ordered separately)
PLEASE NOTE
The FLX 900 is also available with SMA male connector, but in this case with
fixed, non-exchangeable connector (not FME-connection system).
Information on this special version on request.
PROCOM A/S reserve the right to amend specifications
without prior notice.
27/07/12