Procom PRO-bbmphy-200-2-n - Manual

PRO-BBMPHY-200-2-N
Broad Band Power Divider / Combiner
DESCRIPTION
Two antennas connected to the same transmitter or receiver.
Broad band power divider for radio systems.
Combining two transmitters on the same antenna.
Note: The power divider has to be mounted on an extra heat sink when
used as a combiner. Max. 10 W per TX.
Combining two signal generators.
20 W load built-in.
ORDERING DESIGNATION
TYPE PRODUCT NO.
PRO-BBMPHY-200-2-N 210001111
SPECIFICATIONS
ELECTRICAL
MODEL PRO-BBMPHY-200-2-N
TYPE Cascaded Wilkinson-hybrid
FREQUENCY 175 - 225 MHz
MAX. INPUT
POWER
20 W when used as a power divider.
10 W per channel when used as a hybrid combiner.
Note: Extra cooling necessary when used as a hybrid
combiner
INSERTION LOSS < 0.6 dB, typically < 0.5 dB
ISOLATION TX 1 ,
TX 2
> 24 dB, typically > 26 dB
PHASE TX 1 , TX 2
0°
IMPEDANCE Nom. 50 Ω
LOAD 30 W load built-in
SWR < 1.6 all other ports terminated with 50 Ω
MECHANICAL
TEMP. RANGE –30° C → +60° C
CONNECTOR TYPE N-female (other types available)
DIMENSIONS
(L x W x H)
130 (incl. conn.) x 152 x 35 mm
WEIGHT Approx. 400 g
TYPICAL RESPONSE CURVE
PROCOM A/S reserve the right to amend specifications
without prior notice.
01/11/11