Procom DIPX 500-800 - Manual

DIPX 500/800
Diplexer for the 0 - 500 MHz and 800 - 1300 MHz Ranges
DESCRIPTION
Diplexer for combining or splitting the two ranges 0 - 500 MHz and 800 -
1300 MHz.
Excellent wide-band coverage – usable for a lot of applications.
Extremely small dimensions.
Quick installation using dual-adhesive pad provided.
FME-connections on all terminals.
ORDERING DESIGNATIONS
TYPE PRODUCT NO.
DIPX 500/800 200000742
SPECIFICATIONS
ELECTRICAL
MODEL DIPX 500/800
FREQUENCY Low port : 0 - 500 MHz
High port : 800 - 1300 MHz
MAX. INPUT POWER 35 W each port
INSERTION LOSS 0 - 500 MHz : ≤ 0.7 dB
800 - 1300 MHz: ≤ 0.7 dB
ISOLATION Low to high port: ≥ 45 dB
IMPEDANCE 50 Ω on all terminals
MECHANICAL
TEMP. RANGE –30° C → +70° C
CONNECTORS Low : FME
High : FME
Antenna: FME
DIMENSIONS (W x H x D) 50 x 21 x 50 mm
WEIGHT Approx. 60 g
TYPICAL RESPONSE CURVES
The DIPX 500/800 makes it possible to use only one antenna for the
operation of two transceivers (one in each range). See the figure below. The
antenna must be a dual-frequency antenna, e.g. it must be resonant on the
actual frequencies in the two bands. The transceivers may be used
independently and will have no degrading influence on each other. Typically,
the diplexer is installed next to the transceivers and only one cable is used
between the diplexer and the antenna. The diplexer is suitable both for base
station and mobile use.
The main tasks of the diplexer are to protect the individual receiver inputs
from being overloaded by the transmitter in the opposite band and to
ensure a low-loss path between the transceiver and the antenna which is
not loaded by the other branch.
The diplexer can be operated together with any set of transceivers operating
within the 0 - 500 MHz and 800 - 1300 MHz frequency bands.
Dual-frequency antennas are available for both mobile and base station
applications.
PROCOM A/S reserve the right to amend specifications
without prior notice.
11/07/13