Procom DPF 70-6-xl... User Manual

Dpf 70/6-xl

Advertising
background image

DPF 70/6-XL...

6-Cavity Duplexer for the 400 MHz Band

DESCRIPTION

The DPF 70/6-XL… is a 6-cavity duplex filter for duplex radiotelephones.
The DPF 70/6-XL… can be adjusted within the complete

340 - 400 MHz band. The duplexer can be supplied in four different

versions according to duplex spacing required.

See also “Ordering information” below.
The DPF 70/6-XL… is primarily intended for equipment with TX and RX

operating on single frequencies, but it can also, however with slightly

reduced data, be used where the TX and RX operate on several

channels, i.e. within a certain port bandwidth. In the last case, factory

tuning is recommended.
The filter uses full-length ¼ cavities in a compact, extruded aluminium

housing. The chassis is made of passivated steel and teflon insulation

has been applied in the coaxial cables and in the connectors.
The filter is black vinyl coated to prevent corrosion.

ORDERING DESIGNATIONS

TYPE

PRODUCT NO.

DUPLEX SPACING

(MHZ)

DPF 70/6-XL - 5/7

200001838

5 - 7

DPF 70/6-XL - 7/9

200001839

7 - 9

DPF 70/6-XL - 9/13

200001840

9 - 13

DPF 70/6-XL - 13/16

200000448

13 - 16

ORDERING INFORMATION: If duplex TX and RX frequencies are stated when ordering, the duplexers
are delivered factory-adjusted. If TX and RX frequencies are not stated, the filters are delivered non-
adjusted.

SPECIFICATIONS

ELECTRICAL

MODEL

DPF 70/6-XL...

TX/RX FREQUENCY

340 - 400 MHz

MAX. INPUT POWER

50 W

INSERTION LOSS TX-ANT AND ANT-RX
(at 10 MHz duplex spacing)
Single-channel tuned:
Multi-channel tuned, 2 MHz BW:



≤ 1.2 dB (typ. 1.0 dB)
≤ 1.2 dB (typ. 1.0 dB)

TX NOISE SUPPRESSION
ON RX-FREQUENCY
Single-channel tuned:
Multi-channel tuned, 2 MHz BW:



≥ 85 dB
≥ 65 dB

RX ISOLATION ON TX-FREQUENCY
Single-channel tuned:
Multi-channel tuned, 2 MHz BW:


≥ 85 dB
≥ 65 dB

IMPEDANCE

Nom. 50 Ω

SWR (All ports)

≤ 1.5

MECHANICAL

TEMP. RANGE

–30° C → +60° C

FREQ. STABILITY

Approx. 4.5 ppm/° C

CONNECTIONS

BNC-female

DIMENSIONS (L x W x H)

245 x 154 x 33 mm

WEIGHT

Approx. 1123 g

TYPICAL RESPONSE CURVES @ 10 MHz SPACING

PLEASE NOTE

Special configurations of this filter type may be quoted on request. For

instance, the filter can be delivered with other connector types, or with

flying leads (RG 316 coaxial cable) terminated with connectors or for

soldering-connection.

PROCOM A/S reserve the right to amend specifications

without prior notice.
25/08/11

Advertising