Procom SM-MA - Manual

SM-MA
Mast Mounting Bracket for all “MA”-mount Based Antennas
DESCRIPTION
This bracket makes it possible to install all antennas equipped with type
“MA”-mount at the top of a mast tube.
Among these antennas are: BCL 1-KA and AAC 1.
(The BCL 1-KA antenna is as standard equipped with the SM-MA).
The mast tube outer diameter must lie within the range 30 to 44 mm.
Please note that the SM-MA should be installed at the very top of the
mast tube, otherwise the antenna or a part of it will be positioned
parallel to the mast tube and consequently, the SWR and the radation
pattern of the antenna will be distorted.
The SM-MA is made of anodization passivated aluminium, and the U-
bolts and fittings are made of stainless steel.
ORDERING DESIGNATIONS
TYPE NO. PRODUCT NO.
SM-MA 110000052
SPECIFICATIONS
MODEL SM-MA
FUNCTION Mast mounting bracket for MA-mount
based antennas
MAST TUBE OUTER DIA. 30 – 44 mm
MATERIALS Bracket: Natural-coloured anodized aluminium
Fittings: Stainless steel
HEIGHT 91 mm
WIDTH 80 mm
LENGTH 84 mm
WEIGHT Approx. 270 g
PROCOM A/S reserve the right to amend specifications
without prior notice.
11/11/11