Procom LX-mount - Manual

LX-Mount
Mini Mobile Mount for Antennas up to 2400 MHz
DESCRIPTION
Professional quality in an elegant and smooth design.
Wind tunnel optimized pyramidical shape.
Especially suited for roof-mounting.
Low installation depth.
Built-in bendable section for adjustment of the whip (tiltable 15° by
hand).
Internal M5 thread whip-fastening system.
Total height of only 30 mm – satisfies the EC-directive 79/488/EEC.
Stainless steel mounting body.
Provided with FME-connection system – cable to be ordered separately.
Designed for the future – works up to and beyond 2400 MHz.
Whips available for communications systems in the frequency range 150
– 2400 MHz.
ORDER DESIGNATION
TYPE NO. PRODUCT NO.
LX-mount
Order this mount by simply asking for the LX (or LX-mount). Cable is to be ordered separately.
SPECIFICATIONS
MODEL LX-MOUNT
APPLICATION Mount for mobile antennas
FREQUENCY 150 - 2400 MHz
CONNECTION TO WHIP M5 internal thread
CONNECTOR FME-connection system (supplied without cable)
MATERIALS Stainless steel
Cu-nite brass
Environment-proof plastics
COLOUR Black
HEIGHT Approx. 30 mm
INSTALLATION DIA. 31.5 mm
BUILD-IN DEPTH Active : 25 mm
Passive : 11 mm
RECOMMENDED
INSTALLATION TORQUE
3.5 Nm max.
WEIGHT 22 g
MOUNTING 18 mm dia. hole
ROOF THICKNESS Max. 2 mm
FME-SYSTEM ACCESSORIES
FME-CABLES
LENGTH TYPE NO.
1 m 1 m FME
2 m 2 m FME
3 m 3 m FME
4 m 4 m FME
5 m 5 m FME
6 m 6 m FME
4 m white 4 m FME-white
6 m white 6 m FME-white
12 m white 12 m FME-white
18 m white 18 m FME-white
FME-CONNECTORS
CONNECTOR ORDER NO.
FME-FME FME-FME
Prolongation FMEP
N FME-N
FSMA FME-FSMA
BNC FME-BNC
TNC FME.TNC
UHF FME-UHF
Mini-UHF FME-MUHF
Elbow-MUHF FME-EMUHF
Elbow-BNC FME-EBNC
Elbow-TNC FME-ETNC
SMA FME-SMA
For further information about other types of FME-cables please compare the cable data sheets under
accessories in our catalogue.
INSTALLATION
The LX-mount is especially suited for roof-mounting. It is recommended to
mount the antenna at the centre of the roof toensure the best
omnidirectional coverage. Mounting can take place in an 18 mm dia. hole
with access from the outside only.A good contact surface on the inside of
the car body must always be ensured, thus enabling the base plate to get in
directcontact with the metal parts of the car, which is of utmost importance
for proper performance of the antenna.When cleaning the car in car-
washing machines, the whip should be removed. After wash, the whip is
refitted and tightenedlightly.The mount is equipped with a bendable section
(±15°) to make it possible to adjust the antenna to an upright position.
1. INSTALLATION DIMENSIONS