Procom FLG - Manual

FLG
Deck - Mounting Flange for Marine Antennas Based on
Mounting on 1” Threaded Water Pipe
DESCRIPTION
Using this flange all antennas specifically designed for mounting on 1”
threaded water pipe can be mounted on deck, wheelhouse roof, cabin
roof or any other horizontal or near-horizontal surface.
Inside the marine sector the 1” water pipe mounting system for
antennas has gained worldwide acceptance. The antennas are equipped
with a revolving nut, which fits 1” threaded water pipe. From the
Procom line of marine antennas the following models, which are
designed for this type of fixation, can be mentioned:
CXL 3-1, CXL 2-1/..., CXL 2-3, CXL-VHF/GSM, MARCELL, MARCELL 3+,
CXL 70-1/…, CXL 70-3/..., CXL 900-1/…, CXL 900-3/…, CXL 1800-1/…,
CXL 1800-3/..., CXL 1800-6/..., CXL 2400-1/..., CXL 2400-3/...,
CXL 2400-6/...,CXL 900/1800, CXL 900/1800/1900 and GPS 4/….
These antenna types are immediately installable using the FLG.
The FLG is made of triple chrome-plated solid brass. The supplied
fittings are made of stainless steel.
The accompanying tapered spacer is used to compensate for inclining
surfaces to make the antenna stand in a vertical position. The disc is
made of UV-stabilized plastic and is able to level out deck-tilting up to
7.5°.
Please note that an antenna should always be mounted as unobstructed
as possible. Objects in the vicinity of the antenna, especially parallel
metallic parts (other antennas, wires etc.) may have considerable
degrading influence on the SWR and the radiation pattern of the
antenna.
The FLG deck mounting clamp is a member of a complete family of
Procom clamps for 1”-pipe mount antennas. The complete family is
shown below. Using the FLG or one of these accessory items, a vast
majority of all installations can be undertaken.
ORDERING DESIGNATIONS
TYPE NO. PRODUCT NO.
FLG 110000036
SPECIFICATIONS
MODEL FLG
APPLICATION Deck-mounting flange for antennas for 1” water pipe fixation
METERIAL
Triple-chromed solid brass
COLOUR Bright chromium
THREAD G1” - 11 (1” RG water pipe thread)
HEIGHT Approx. 82 mm
WEIGHT Approx. 0.45 kg
MOUNTING On horizontal surfaces or surfaces with inclination up to 7.5°
INSTALLATION DETAILS
OTHER ACCESSORIES
PROCOM A/S reserve the right to amend specifications
without prior notice.
11/11/11