Procom SB 27-1-4-fme - Manual

SB 27 1/4-FME
Steel-Band Antenna with Universal FME-Connection System
for Portable Equipment in the 27 MHz Band
DESCRIPTION
Rugged, flexible steel-band antenna whip.
Curved sectional area to help keeping the antenna erect.
Shortened ¼ λ whip yields an acceptable mechanical length.
Provided with toggle joint and wing screw for easy fold-down.
Delivered factory tuned and tested to ensure minimum SWR and
optimum performance.
Provided with universal FME-connection system for optimum flexibility
and easily exchangeable connectors.
Designed for use with the following of Procoms line of black FME-
connectors (to be ordered separately): BFME-UHF, BFME-BNC, BFME-
TNC, and BFME-N.
ORDERING DESIGNATIONS
TYPE PRODUCT NO.
SB 27 1/4-FME 140000045
SPECIFICATIONS
ELECTRICAL
MODEL SB 27 1/4-FME
ANTENNA TYPE Shortened ¼ λ antenna for portable equipment
FREQUENCY 27 MHz CB band
IMPEDANCE Nom. 50 Ω
POLARIZATION Vertical
SWR < 2 when mounted directly on portable equipment
MAX. POWER 25 W
MECHANICAL
MATERIALS Stainless steel band and rubber Black-chromed brass
COLOUR Black
TOTAL HEIGHT Approx. 650 mm
WEIGHT Approx. 85 g
CONNECTOR FME (female)
(Exchangeable BFME-connectors to be ordered
separately)
RECOMMENDED BFME-CONNECTORS
(To be ordered separately)
PLEASE NOTE
The SB 27 1/4 is also available with different thread studs, but in this case
with fixed, non-exchangeable connector (not FME-connection system).
Information on these special versions on request.
PROCOM A/S reserve the right to amend specifications
without prior notice.
16/05/12