Procom FLX 2412-...-fme - Manual

FLX 2412/...-FME
End-Fed ½ λ Dipole Antenna with Universal FME-
Connection System for Portable Equipment in the 2500
MHz Band
DESCRIPTION
Flexible antenna made of steel wire covered with black silicone tubing.
End-fed ½ λ whip – groundplane independent.
High gain and efficient decoupling from the portable equipment due to
half-wave design.
5 dB gain compared to a ¼ λ antenna whip on the same equipment.
Highest quality materials in a long-lasting and durable design.
Models available for the ISM, RLAN, WLAN systems.
Provided with universal FME-connection system for optimum flexibility
and easily exchangeable connectors.
Designed for use with the following of Procom's line of black FME-
connectors
(to be ordered separately): BFME-BNC, BFME-TNC, BFME-N, BFME-
MUHF, BFME-EBNC, BFME-ETNC and BFME-EMUHF.
ORDERING DESIGNATIONS
TYPE PRODUCT NO.
FLX 2412/...-FME 140000223
SPECIFICATIONS
ELECTRICAL
MODEL FLX 2412/...-FME
ANTENNA TYPE End-fed ½ λ antenna for portable equipment
FREQUENCY To be specified within 2300 – 2500 MHz
IMPEDANCE Nom. 50 Ω
POLARIZATION Vertical
GAIN 5 dB (compared to a ¼ λ portable antenna
on the same equpiment)
BANDWIDTH ≥ 100 MHz @ SWR ≤ 2.0
SWR < 1.3 @ f. res.
MAX. POWER 25 W
MECHANICAL
MATERIALS Silicone tube over flexible steel wire
Black-chromed brass
COLOUR Black
TOTAL HEIGHT Approx. 100 mm
WEIGHT Approx. 22 g
CONNECTOR FME (female) (Exchangeable BFME-connectors
to be ordered separately)
TYPICAL SWR CURVE
RECOMMENDED BFME-CONNECTORS
(To be ordered separately)
PROCOM A/S reserve the right to amend specifications
without prior notice.
27/07/12